![RPM Powersports](/img/default-banner.jpg)
- Видео 172
- Просмотров 1 915 629
RPM Powersports
США
Добавлен 13 июн 2014
RPMSxS.com is located in the center of the US in Omaha, NE manufacturing top quality upgrades for sport utility vehicles and snowmobiles. Specializing in silicone intake tubes, performance exhaust systems and many other products. Find product and installation videos here on our RUclips Channel.
Speed UTV - RPM Brushless Fan Upgrade! Run cooler & Use Less Amps!
▼ Fan Upgrade Kit Available Here! ▼
rpmsxs.com/products/speed-utv-replacement-fans?_pos=1&_sid=f7c5349e6&_ss=r
▲ Fan Upgrade Kit Available Here! ▲
There are a lot of variables that go into the amperage draw and CFM. Tested at 13.5v, the factory fans starting amps are 10.2 amps and runs at 8.5. The RPM fan, with 13.5v, operates at 6.9-7 and has a softer start, eliminating amperage spikes. For testing CFM, it’s impossible to test the whole unit as one as the fans are programmed to come on at different times. in addition to this, there are a multitude of ways to test the CFM. How we test ours and what we know is that the RPM Brushless fans pull 1245 CFM where stock tests at around 760CFM per fa...
rpmsxs.com/products/speed-utv-replacement-fans?_pos=1&_sid=f7c5349e6&_ss=r
▲ Fan Upgrade Kit Available Here! ▲
There are a lot of variables that go into the amperage draw and CFM. Tested at 13.5v, the factory fans starting amps are 10.2 amps and runs at 8.5. The RPM fan, with 13.5v, operates at 6.9-7 and has a softer start, eliminating amperage spikes. For testing CFM, it’s impossible to test the whole unit as one as the fans are programmed to come on at different times. in addition to this, there are a multitude of ways to test the CFM. How we test ours and what we know is that the RPM Brushless fans pull 1245 CFM where stock tests at around 760CFM per fa...
Просмотров: 1 062
Видео
Polaris RZR 3" TITANIUM Captains Choice Exhaust - RPM SxS E-Valve!
Просмотров 461Месяц назад
▼RPM SxS Titanium 3" E-Valve Available Here! ▼ rpmsxs.com/products/rpm-sxs-polaris-rzr-titanium-ti-e-valve-3-electronic-dump-valve-exhaust-xpt-turbo-r-turbo-s?_pos=2&_sid=2ce3cf494&_ss=r ▲RPM SxS Titanium 3" E-Valve Available Here! ▲ Amazing Sounding, Amazing Performance! Filip the switch for race mode, flip it back for quit mode! These pipes are INSANE! How do we out do the extremely popular 3...
Awesome Sounding 2024+ RZR XP1000 Sport Muffler, RPM SXS XP 1000 Exhaust
Просмотров 1,5 тыс.Месяц назад
Pick up your 2024 RZR XP 1000 sport muffler here! ▼▼Buy it direct from RPM SxS HERE! ▼▼ rpmsxs.com/collections/polaris-xp1000-rs1-exhaust/products/2024-2025-rzr-xp1000-rpm-sxs-catless-sport-muffler This is a OEM Replacement slip on style muffler that retains all stock covers and hardware! This Sport Muffler provides a minimum 3HP gain on a stock machine. This is a huge power gainer for tuned ma...
Our First Legit Speed UTV Review & Future Plans! RPM Speed Exhaust Coming Soon!
Просмотров 5 тыс.2 месяца назад
Insert hate comments below. For those who haven't driven one, don't knock it 'till you try it. The platform doesn't suck, but I don't think its replacing my Pro R for a desert rig anytime soon. (; Stay tuned and subscribe for more Speed UTV content to come. Check out our website! : rpmsxs.com Check out our Instagram! : rpm_powersports Don't forget to hit that like and subscribe bu...
RZR 200 RPM SxS Full Exhaust Install
Просмотров 4893 месяца назад
Here we display the install procedure for the RPM RZR 200 Full Exhaust. ▼SOUND CLIPS ▼ ruclips.net/video/W74MEI4hG0U/видео.html This is a quick and easy installation with the tools below. Socket Wrench with 6" & 3" extension 10mm & 13mm sockets 14mm wrench Wire Snips Check out our website! : rpmsxs.com Check out our Instagram! : rpm_powersports Don't forget to hit that like and su...
RPM Gets a SPEED UTV! Exhausts and other parts coming SOON!
Просмотров 5 тыс.3 месяца назад
It's here! What are your thoughts on the Speed UTV!? Check out our website! : rpmsxs.com Check out our Instagram! : rpm_powersports Don't forget to hit that like and subscribe button. New videos every week.
Pro XP and Pro R Rear Fascia Delete for RPM Exhausts!!!
Просмотров 6654 месяца назад
Pro R Fascia Delete rpmsxs.com/products/pro-r-rear-fascia-delete-trim-shield Pro XP Fascia Delete rpmsxs.com/products/pro-xp-turbo-r-rear-fascia-delete-shield Check out our website! : rpmsxs.com Check out our Instagram! : rpm_powersports Don't forget to hit that like and subscribe button. New videos every week. #RPMSxS #rzr #Polaris
Can Am Maverick R Auxiliary Fuel Tank Installation
Просмотров 2,5 тыс.4 месяца назад
Access to related installation images in Can-Am Maverick R Auxiliary Fuel Tank PDF instructions will be needed and can be found here: rpmsxs.com/pages/instructions Time Stamps: Installation Introduction: 0:06 Seat Removal: 0:59 Fuel Tank Dash Access: 1:13 Tank Prep: 1:43 Tank Install: 2:59 Fuel Pump Installation: 7:48 Passenger Tank Installation: 12:41 Tank addon Kit: 13:25 Fill-A-Buddy Accesso...
PRO R Shorty Clutch Tube from RPM ! Clean Up Your Engine Bay!
Просмотров 1,5 тыс.4 месяца назад
▼RPM PRO R Shorty Clutch Tube Available Here! ▼ rpmsxs.com/products/pro-r-shorty-clutch-tube Pro R "SHORTY" Reduced Height Silicone Clutch Exhaust Vent Silicone The ultimate fix to the Polaris Pro R's oversize, ugly, bulky, clutch vent hose. This silicone clutch vent hose allows for drastically cleaner engine bay and easier access to the engine bay. The SHORTY from RPM is, as pictured, drastica...
Can-Am Maverick R BLOW-OFF VALVE Sound Clips - RPM SxS BOV!
Просмотров 7 тыс.5 месяцев назад
Filmed on a variety of RPM SxS Maverick R exhausts, we have assembled a compilation of BOV sound clips for those wondering what sounds like what! Pick up your RPM SxS Maverick R silicone, BOV Kit, Intake, & Exhausts at RPMSxS.com ▼▼Buy it direct from RPM SxS HERE! ▼▼ rpmsxs.com/collections/can-am-maverick-r Check out our website! : rpmsxs.com Check out our Instagram! : rpm_powersp...
RZR 200 RPM Sport Full Exhaust Sound Clips! SOUNDS AWESOME!
Просмотров 1,6 тыс.5 месяцев назад
This little RPM exhaust is hands down one of the best sounding exhausts on the market for the RZR 200! 304 Stainless Tig Welded Construction, Stepped Header, & Pie Cut Turn Down Tip! Make your Polaris RZR 200 RIP! ▼▼Buy it direct from RPM SxS HERE! ▼▼ rpmsxs.com/products/rpm-rzr-200-sport-muffler Check out our website! : rpmsxs.com Check out our Instagram! : rpm_powersports Don't ...
Can-Am Maverick R RPM E-Valve Exhaust Bracketry Installation & Tip Adjustment
Просмотров 1,1 тыс.5 месяцев назад
This is a quick video outlining the procedures and step to installing the mid pipe bracketry and tip alignment and adjustment to achieve a symmetrical look! For RPM Mid Pipe Installation visit this video Maverick R Mid Pipe Install - ruclips.net/video/Dc3aiDN79YI/видео.html RPM Full Installation Instructions directory can be found here - rpmsxs.com/pages/instructions Check out our website! : rp...
RPM SxS Can-Am Maverick R 3" E-Valve Mid Pipe / Electronic Dump Valve
Просмотров 14 тыс.5 месяцев назад
Purchase your Maverick R E-Valve Mid Pipe or any RPM Maverick R items by clicking the link! ▼▼Buy it direct from RPM SxS HERE! ▼▼ rpmsxs.com/collections/can-am-maverick-r-exhaust Don't settle for a electric valve exhaust unless its going to actually make some power! How do we make power? By letting it breathe! Our e-valve is a TRUE 3" free flowing design with a proprietary custom tip designed t...
RZR Pro R 3" Full Sport DUAL Muffler From RPM SxS
Просмотров 3 тыс.5 месяцев назад
RZR Pro R 3" Full Sport DUAL Muffler From RPM SxS
NEW! Can Am Defender Sport Muffler Exhaust From RPM!
Просмотров 3,5 тыс.5 месяцев назад
NEW! Can Am Defender Sport Muffler Exhaust From RPM!
CAPTAINS CHOICE RZR XP1000 2.5" Dump Valve Exhaust for 2024+ Models SOUNDS INSANE!
Просмотров 4,3 тыс.6 месяцев назад
CAPTAINS CHOICE RZR XP1000 2.5" Dump Valve Exhaust for 2024 Models SOUNDS INSANE!
RZR Pro R Oil Fill Plate / Turbo Oil Return
Просмотров 1,4 тыс.6 месяцев назад
RZR Pro R Oil Fill Plate / Turbo Oil Return
Can Am MAVERICK R 3" Sport Muffler from RPM, EXHUAST SOUNDS AMAZING!
Просмотров 6 тыс.6 месяцев назад
Can Am MAVERICK R 3" Sport Muffler from RPM, EXHUAST SOUNDS AMAZING!
RZR XP 1000, Turbo S, & XPT RPM Auxiliary Fuel Tank. Adding 9 Gallons Of Fuel!
Просмотров 7636 месяцев назад
RZR XP 1000, Turbo S, & XPT RPM Auxiliary Fuel Tank. Adding 9 Gallons Of Fuel!
Installing a RPM BIG FATTY Silicone Intake Tube on a Can-Am Maverick R
Просмотров 8516 месяцев назад
Installing a RPM BIG FATTY Silicone Intake Tube on a Can-Am Maverick R
Installing an RPM Exhaust / Muffler on a Can Am Maverick R
Просмотров 1 тыс.6 месяцев назад
Installing an RPM Exhaust / Muffler on a Can Am Maverick R
How to Install the RPM SxS Can-Am Maverick R Mid Pipe
Просмотров 1 тыс.6 месяцев назад
How to Install the RPM SxS Can-Am Maverick R Mid Pipe
Maverick R E-Valve Sport Muffler Exhaust From RPM SxS
Просмотров 2 тыс.6 месяцев назад
Maverick R E-Valve Sport Muffler Exhaust From RPM SxS
Can-Am Maverick R Exhaust! RPM Chambered ~ Quiet Muffler
Просмотров 1,9 тыс.6 месяцев назад
Can-Am Maverick R Exhaust! RPM Chambered ~ Quiet Muffler
2024+ Polaris RZR XP1000 RPM "ECF" Electric Clutch Fan Kit - Lower Clutch / Belt Temperature
Просмотров 2 тыс.6 месяцев назад
2024 Polaris RZR XP1000 RPM "ECF" Electric Clutch Fan Kit - Lower Clutch / Belt Temperature
Can-Am Maverick R Gets A RPM 3" Muffler Delete & 3" Resonated Mid Pipe
Просмотров 6 тыс.6 месяцев назад
Can-Am Maverick R Gets A RPM 3" Muffler Delete & 3" Resonated Mid Pipe
How to Install the RPM SxS Maverick R Catch Can
Просмотров 8196 месяцев назад
How to Install the RPM SxS Maverick R Catch Can
Can Am X3 2020-2024 Sealed Intercooler Fan Shroud WITH 10" 10 Blade Brushless Fan Upgrade
Просмотров 1,1 тыс.7 месяцев назад
Can Am X3 2020-2024 Sealed Intercooler Fan Shroud WITH 10" 10 Blade Brushless Fan Upgrade
RZR Pro XP and XP Turbo Muffler Delete is LOUD & PROUD
Просмотров 5 тыс.7 месяцев назад
RZR Pro XP and XP Turbo Muffler Delete is LOUD & PROUD
RPM Polaris Scrambler 1000S Slip On Sport Muffler
Просмотров 1,2 тыс.7 месяцев назад
RPM Polaris Scrambler 1000S Slip On Sport Muffler
i waited for the v2 deffently load I was worried it woudent be load might get annoying if your not in to in but I am
That noise is soo rediculus.. i know a few guys who qent with the "bov" just for the noise. They have no idea whats it's purpose..
Just ordered mine ready to hear it !
For those that paid big buck's for one of these get ready to take a bath when you sell it.
In comparison to what? Maverick R's that are $10k off MSRP right now or the $8k off msrp of the Pro R's? In comparison to those two models, the speed's holding strong in value.
@@RPMPowersports Whos got $8k off the Pro R.
Does it fit yamaha yxz1000 with GYTR turbo kit?
It will work with anything that has a 25mm BOV port!
Cool kit, I might have to order one and try it out...
is it possible to crack the cat delete if you overtighten clamp????
No
@@RPMPowersports thanks
Will mud and water come thru this?
@@matthewpayne4614 after it works it way through the doors and floor boards it will work its way in when you submerge the machine.
Be nice to hear them both under load.. The CAT delete talks.
Just picked up an almost new 2023 X3 turbo RR. Seems like a 91 tune would be a solid set up for a trail machine.
I just did install this cat delete with a slip on do I need to tune the car or will I be fine?
No tune needed!
Thanks for putting the kit together! Need an oil cooler setup BAD on these cars.
I think Speed is out of business. No content after all the disasters of the early cars
What’s the db on this one?
Needs a 4 cylinder
Needs a turbo Pro R motor! hmmmmm
Can you put this on a brand new stock 2024 x3 without any type of tune?
Yes
It sounds like the fastest weed wacker on the block
Do you guys have a radiator fan override switch kit for the X3? That’s something I’ve been looking for for a LONG time. I LOVE the brushless rad fan btw, thing is sweet
You can wire our overrides to the front fan, but we do not make a plug and play kit.
I would never consider a pro R much less a 4 seater. Just get a small pro xp and spend a little money on mods and call it a day. I mean especially if speed is what you want. It has a turbo you can smoke a pro R. Can you imagine spending 40k on a pro R then spending another what 5k on a turbo. Kick rocks.
you should do a walk around Looks like it's blowing hot air on the backseats
Fans are pulling air... not blowing. So it would be sucking fresh air from the back seats and blowing it towards the bed.
Does this void the warranty ?
No
Looks like they blow! 😅
is it ok to leave the turbo exposed like that ?
All of our exhausts allow the use of the factory shields. We also have a heat blanket that can be further added. A lot of guys run no shields. The 3" exhausts actually run cooler than factory as well.
@@RPMPowersports thats nice to know cause i whanted to take it right out cause that sheild keeps rattling
…… need a muffler in Ti to match.
What light bar on the XP turbo..please?
Sorry, we built that car years ago. I'm not sure what we used.
How can you tell the difference in springs and what are they for, I believe you said sound?
The PDF Instructions covers the detailed specs.
Im a little disappointed that it dont turn on the front fans . Turning on the two in the back don't seem to help out much. Kind of a wast of money if u ask me
I don't think we could have made it in more clear in the videos or descriptions that it doesn't over ride the front fans. There is a reason we don't over ride them, but I guess you're right. As long as you're content with high trans and IAT temps then yes, this is a waste of money.... In fact, to make the machine a value, we actually suggest to remove the fans all together, sell them on eBay, this way the cost of the machine is reduced because honestly, again, IAT's and coolant temps are practically irrelevant to performance.....That's just if you ask me.
Is there any way to get air to the back seats ?
Yes, we sell a roof top vent scoop! rpmsxs.com/products/air-intake-louvers?_pos=14&_sid=182e24c11&_ss=r
10% is not good actually it is f@#$ed
Well, that's just like, your opinion babe.
Is there only a drivers side tank that fits under the seat? Turbo R 4. Looking for max capacity with the ability to carry 4 still
You'd run the auxiliary fuel tank for that.
Question can we paint these after you get them, or can you guys sell em in black ?
We do not sell them in black. However other customers have powder coated theirs!
Great video but think it's funny like the hardest part of the install you guys are like yeah go to your pdf instructions and figure it out lol 😆 like you could of atleast showed it to give us an idea how it goes
We use the PDF portion as its VERY important and specific.
installed his on my 2020 x3 and Im getting some small amount of air leaking around the lower fitting attaching to the belt housing. is this normal and will water be a problem getting in any faster per say?
Loosen the clamps, reposition it and re tighten.
@@RPMPowersports Its the 2 black notches for the stock down pipe is making a gap. should i sand them off?
Looks like a dust inlet too.....
True, dust doesn't ever come in the 4'x4' opening you're looking out of though so I could see that worry.
Do you guys have a video of the Honda talon?
Not yet.
Would love to see yxz and 6 speed in speed utv.
YXZ is possibly the most underpowered powerplant in a sport UTV. The Maverick R has a 6 speed.
@RPMPowersports maybe stock 15 psi boost 300 hp all day long 10.5 k rpms
Do you know if this muffler delete tip would burn a exhaust valve being a straight pipe essentially.
No, that's not how turbo machines work.
How much did the temps drop on the Speed after installing your fans? Any back to back data? I like the low amperage draw of the brushless fans.
Were waiting on some parts from speed to get us up and running, so that's the reason for lack of testing and posting lately. There are a lot of variables that go into the amperage draw and CFM. At 13.5v The factory fan starting amps is 10.2 amps and runs at 8.5. Our fan, with 13.5v, operates at 6.9-7 and has a soft start, so there is no amperage spikes. For CFM, it’s impossible to test the whole unit as the fans come on at different times, there is also a multitude of ways to test the CFM. But per fan we know ours pull 1245 CFM, stocks around 760CFM per fan. This is tested at the front of the intercooler, per section, evenly divided / restricted. As far as how much that helps, again its really hard to get the EXACT same tests done. we essentially need 2 cars so we can start them dead cold, run them the same course and time, swap 1 cars fans, and test. Then re-test again. All ideally on the same day so there are no skewed variables and conditions. We got this done on the X3 platform, but those are a little more readily available.
Where can I find one of these kits that fit a 2016 can Am Maverick 1000 X ds?
Will this also work on a 2018 rs1?
Slightly different head pipe. Youd need to make 1 cut and weld to make it work. Many have done it.
Will this also work on a 2018 rs1?
whaens the scrambler 850 exhaust coming
Soooooooon
Does it come with a spark arrestor
It does not.
Is a tune required after installation ?
No tune needed!
That ds is 135 with pdrive not 120
Except its a 22 model with 120hp and not a p drive (;
Speed car is a joke
How ?
does this fit my x3 max ds
As long as its not a base model, but we have a kit for base models also!
Please show how you install it on the X3 on the passenger side.
It's universal, not specifically for anything. Where you want it is up to you, near the bottom of the fuel tank , and on either firewall works for the X3 passenger side. It's ok to be in line with the tank, the louver directs the air downward.
I ordered a kit for my 2024 Commander XT-P. It looks my the firewall is double layer. Will I have any problem getting that threaded through?
Only mount to one wall, the second wall would have a larger hole.
@@RPMPowersports Yep! That’s what I was thinking I would need to do. Thank you! I’ll comment back when I get ‘em on!
Sounds like a cow! Looks underpowered not worth the money!